SnoBlox Deuce Medium Bronze Polycarbonate Snow Guard – Canada

The SnoBlox Deuce® in Medium Bronze is a color-through polycarbonate snow guard — the color runs through the resin, not a coating that can chip or peel. Matches medium bronze — one of the most popular roof colors in Canada. Stocked in Canada for fast delivery.

Color-Through Resin
Medium Bronze Finish
Adhesive or Screw-Down
Ships from Canada

Request a Spacing & Layout Recommendation Shop More Polycarbonate Snow Guards

Need help with quantity or placement? Call +1 (717) 433-0997 — we’ll help confirm rows and spacing based on roof pitch and snow load.

Why Color-Through Matters

Because the color is molded through the polycarbonate, there is no coating to chip, flake, or peel — the finish holds up through Canadian freeze–thaw cycles.

Deuce

Patented waffle base

Medium Bronze

Color-through

2-in-1

Glue or screw

Get Help Choosing Quantity

Medium Bronze Snow Retention That Blends With Your Roof

The SnoBlox Deuce® is a patented economical pad-style snow guard with a waffle base for superior adhesive grip. A warm bronze for the most common architectural metal color. It manages roof snow release by holding snow in place so it melts gradually instead of releasing in a sudden slide.

Protect people & property: Reduce dangerous snow slides near entrances, walkways, and driveways
Prevent gutter damage: Cut down on bent and torn-off gutters from sudden snow release
Color matched: Medium Bronze runs through the resin to blend with medium bronze-toned roofing
Versatile mounting: Adhesive-mount on standing seam or screw-down on exposed-fastener panels

Want to avoid guessing? Request a free spacing recommendation.

Patented Polycarbonate Construction

100% Virgin UV-Stabilized Polycarbonate

The same material class used for astronaut face shields.

Material: Virgin UV-stabilized polycarbonate, made in the USA
Durability: Resists yellowing; rarely ambers over time
Strength: Comparable holding strength to metal pad-style guards

Waffle Base for Adhesive Mounting

Engineered to grip standing seam panels without penetration.

Base: Waffled base improves SB-190 adhesive bond
Rib fit: Fits between most minor ribs without straddling
Finish: Color-through Medium Bronze — no coating to chip or peel

Adhesive or Screw-Down Installation

The Deuce mounts with SureBond SB-190 adhesive on standing seam roofs or with screws on exposed-fastener panels. Stagger guards across the full roof for an effective snow-retention pattern.

Adhesive mount: Clean the panel with rubbing alcohol, let dry, then bond with SB-190 (cure above 50°F)
Screw-down mount: Fasten into a purlin or structural support — never just the metal sheet
Spacing: Lay out in a staggered pattern across the entire roof, not isolated sections

Frequently Asked Questions

Will the color fade or peel?

No. The Deuce is color-through polycarbonate, so the color is molded into the resin rather than applied as a coating. Color-matched guards may cast shadows and weather slightly differently than the roof over time.

Can I glue this to a standing seam roof?

Yes. Polycarbonate snow guards like the Deuce are the only type recommended for adhesive mounting on standing seam roofs, using SureBond SB-190.

How many do I need?

It depends on roof pitch, rafter length, and your local snow load. Send us your details and we'll build a free spacing layout — call +1 (717) 433-0997.