SSRA3 aluminum anchor plate mounted across two standing seams with a centre D-ring
SSRA3 Anchor Plate | Universal Mounting Plate for Standing Seam Roofs
I Already Have 2 Standing Seam Roof Anchors For Mounting
$549.99 CAD
Skip to product information
SSRA3 aluminum anchor plate mounted across two standing seams with a centre D-ring
1/3
  • SSRA3 aluminum anchor plate mounted across two standing seams with a centre D-ring
  • Close-up of the SSRA3 plate edge showing the D-ring and an SSRA1 seam anchor underneath
  • Worker tied off to a horizontal lifeline anchored by an SSRA3 plate on a standing seam metal roof
SSRA3 Anchor Plate | Universal Mounting Plate for Standing Seam Roofs

SSRA3 Anchor Plate | Universal Mounting Plate for Standing Seam Roofs

$549.99 CAD
Requires Two (2) Standing Seam Roof Anchors Per Plate: (Required)

Canada Snow Guards · Standing Seam Roof Anchor System

Ships from Paris, ONCAD pricing · No dutiesNon-penetratingANSI/OSHA tested

The SSRA3 is a 6061-T6 aluminum spanner plate that bolts across two SSRA1 anchors on adjacent seams. The result is a non-penetrating anchorage on a standing seam metal roof: a single-person tie-off point, an end anchor for a temporary horizontal lifeline, or a solid mounting base for walkways and rooftop equipment.

What the SSRA3 anchor plate does on a standing seam roof

  • Turns two SSRA1 seam anchors into a single-person tie-off point (one worker, 310 lbs max)
  • Anchors each end of a temporary horizontal lifeline — it's the base of the SSRA 100' lifeline kit
  • Gives you a flat, non-penetrating mounting surface for equipment such as walkways, walkboard brackets, handrail mounts, HVAC, solar or satellite gear (attachments must be approved by a qualified person)
  • Forged D-ring mounts vertically or horizontally through the four centre holes

How the SSRA3 mounts on two SSRA1 anchors

Install two SSRA1 anchors in line on adjacent seams, level with each other. Slide the plate over both anchors so its grooves line up with the top bolt holes, leave equal overhang at each end, and bolt it down with the supplied Grade 8 hardware. No drilling, no roof penetrations. Use only SSRA1 anchors with this plate.

Two ways to order the SSRA3 anchor plate

  • Plate only — you already have two SSRA1 anchors
  • Plate + 2 SSRA1 anchors — everything you need to mount one plate

SSRA3 anchor plate specifications

Material 6061-T6 aluminum · 3/8" thick
Size 12" x 27" overall
Fits Standing seam panels 12"–24" wide · 22 and 24 gauge steel
Mounting 2 SSRA1 anchors per plate (sold separately or as an option)
Rating 5,000 lb anchorage rating · 1 worker per plate, 310 lbs max
Testing Independent static strength tests (Intertek, 2018): every sample held 5,000 lbf in side and in-line loading
Standards ANSI/ASSE Z359.18-2017 Type A (tested) · OSHA 1910.140 & 1926 Subpart M
Included SSRA3 plate · FallTech 7414 forged D-ring · (4) Grade 8 3/8-16 x 1" plate bolts with washers · (2) Grade 8 3/8-16 x 1.25" D-ring bolts · (2) locking flange nuts · (4) flat washers
SKU SSRA3

Is the SSRA3 CSA certified? Compliance in Canada

The SSRA system is tested to ANSI/OSHA requirements. It is not CSA Z259 certified — confirm compliance requirements with your provincial authority or project engineer before use in fall-arrest applications.

Why buy the SSRA3 from Canada Snow Guards

Orders ship from Paris, Ontario across every province and territory in Canadian dollars — no duties, no brokerage, no border surprises. We stock the full SSRA system, so the anchors, plates and roof jacks arrive together.

Planning a lifeline run? Send us your roof. We'll do the math — tell us the seam profile and run length and we'll list the anchors and plates you need.

Send us your roof →

You may also like